R&S SMW-K553, Руководство пользователя

Страница: 20 / 44

External frontend configuration and settings
R&S
®
SMW-K553
20 User Manual 1179.4240.02 ─ 02
4 External frontend configuration and settings
● External RF settings ................................................................................................20
● RF frontend settings ................................................................................................20
4.1 External RF settings
Access:
► Select "Taskbar" > "System Config" > "System Configuration" > "External RF and
I/Q".
For a description of the external RF settings, see chapter "External RF and I/Q set-
tings" in the R&S
SMW user manual.
4.2 RF frontend settings
Access:
► Select one of the following in the block diagram:
● Click the "FE ..." icon to the right of the "RF A/RF B" block.
For example, the icon displays "FE44S" for an R&S FE44S connected to the
R&S SMW.
● Select "RF A/RF B" > "RF Frontend" > "Frontend Device".
The remote commands required to define the settings are described in Chapter 6.1,
"SOURce:EFRontend subsystem" , on page 33.
To operate an external frontend with the R&S SMW
See Chapter 3, "Operating external frontends" , on page 12.
Settings:
● General settings ......................................................................................................21
● Versions and options information ............................................................................24
● Attenuator settings .................................................................................................. 25
● Cable correction settings .........................................................................................26
● Network settings ......................................................................................................28
RF frontend settings