R&S SMJ100A, Руководство по эксплуатации

Страница: 682 / 874

Remote Control Commands
R&S
®
SMJ100A
666 Operating Manual 1403.7458.32 ─ 14
Manual operation: See "Save/Recall User" on page 345
[:SOURce<hw>]:BB:DM:STANdard:ULISt:LOAD <Filename>
Loads the selected file with Digital Standard settings. The directory is set using com-
mand
MMEM:CDIRectory
. A path can also be specified, in which case the files in the
specified directory are read. The file extension may be omitted. Only files with the file
extension
*.dm_stu
will be loaded.
Setting parameters:
<Filename> string
Example: BB:DM:STAN:ULIS:LOAD 'DM_QAM'
loads file 'DM_QAM'.
Usage: Setting only
Manual operation: See "Save/Recall User" on page 345
[:SOURce<hw>]:BB:DM:STANdard:ULISt:STORe <Filename>
Stores the current Digital Standard settings into the selected file. The directory is set
using command
MMEM:CDIRectory
. A path can also be specified, in which case the
files in the specified directory are read. Only the file name has to be entered. User
Standards are stored as files with the specific file extensions
*.dm_stu
.
Setting parameters:
<Filename> string
Example: BB:DM:STAN:ULIS:STOR 'DM_QAM'
stores the current Digital Standard settings into file 'DM_QAM'.
Usage: Setting only
Manual operation: See "Save/Recall User" on page 345
7.16.3.4 SOURce:BB:GRAPhics Subsystem
This subsystem contains the commands used to setup the graphical display.
[:SOURce<hw>]:BB:GRAPhics:MODE
............................................................................. 666
[:SOURce<hw>]:BB:GRAPhics:SMARt:STATe
..................................................................667
[:SOURce<hw>]:BB:GRAPhics:SRATe:MODE
..................................................................667
[:SOURce<hw>]:BB:GRAPhics:SRATe:USER
...................................................................668
[:SOURce<hw>]:BB:GRAPhics:STATe
.............................................................................668
[:SOURce<hw>]:BB:GRAPhics:TRIGger:SOURce
.............................................................668
[:SOURce<hw>]:BB:GRAPhics:MODE <Mode>
Selects the graphical signal display.
SOURce Subsystem