Instrument Control
R&S
®
SMCV100B
67
Getting Started 1432.7046.02 ─ 02
Legend
Item
Description
3
Control signal block
Indicates information on the control signals like signal
content, input or output and provides quick access to the
corresponding configuration dialog.
A dedicated control block is displayed for the baseband
block (3a) and RF block (3b).
4, 6
Signal lines (digital, ana-
log)
Show the currently configured signal flow.
●
Thick lines represent the digital I/Q streams, see (4)
in the figure above
●
Thin lines represent the analog signals (6)
5
Graphics indicator
Denotes that the signal is displayed graphically (5a/5b).
7
Connector icons
Represent the interfaces for signal input and output.
●
RF signal connector output (7a)
Icons vary depending on the frequency.
●
Digital I/Q HS signal connector input and output (7b,
7c)
8.3.3
Taskbar
The "Taskbar" contains labeled softkeys and minimized views (thumbnails) of
active graphics and dialogs.
Initially, it shows the permanently assigned softkeys. The softkey with the sine
wave denotes that no signal is activated for graphical representation.
Figure 8-2: Taskbar in default state
Whenever you open a settings or graphics dialog, it is automatically assigned to
the "Taskbar". The softkeys shown in the following figure represent the variants.
Figure 8-3: Taskbar fully assigned
1 = System configuration
2 = Graphics
3 = Remote control connections
4 = Dialogs
5 = Diagram / more
Understanding the Display Information
