Remote Control Commands
R&S
®
SGT100A
411
User Manual 1176.8674.02 ─ 07
Parameters:
<State>
0 | 1 | OFF | ON
Example:
BB:IMP:OPT:STAT ON
activates internal compensation of signal distortions.
Manual operation:
See
"Optimize internal IQ-Impairments for RF Output"
[:SOURce]:BB:IMPairment:IQOutput<ch>:STATe
<State>
Activates the impairment or correction values LEAKage, QUADrature and IQRatio for
the corresponding stream.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Manual operation:
See
[:SOURce]:BB:IMPairment:IQOutput<ch>:DELay
<Delay>
Defines the time delay of both I and Q vectors between the marker signal at the marker
outputs relative to the signal generation start.
A positive value means that the I and Q vectors delay relative to the marker/trigger or
to the other instrument and vice versa.
Parameters:
<Delay>
float
Range:
-500E-9 to 500E-9
Increment: 1E-12
*RST:
0
Manual operation:
See
[:SOURce]:BB:IMPairment:IQOutput<ch>:QUADrature[:ANGLe]
<Angle>
Sets the quadrature offset. A positive quadrature offset results in a phase angle greater
than 90 degrees.
Parameters:
<Angle>
float
Range:
-10 to 10
Increment: 0.01
*RST:
0
Manual operation:
See
SOURce Subsystem