Signal Generator Settings
R&S
®
SGT100A
141
User Manual 1176.8674.02 ─ 07
Positive values mean that the Q vector is amplified more than the I vector by the corre-
sponding percentage. Negative values have the opposite effect.
Remote command:
[:SOURce<hw>]:BB:IMPairment:IQRatio[:MAGNitude]
[:SOURce]:BB:IMPairment:IQOutput<ch>:IQRatio[:MAGNitude]
Quadrature Offset
Sets the quadrature offset (see
Chapter 7.3.2.3, "Quadrature Offset"
Remote command:
[:SOURce<hw>]:BB:IMPairment:QUADrature[:ANGLe]
[:SOURce]:BB:IMPairment:IQOutput<ch>:QUADrature[:ANGLe]
Skew
Sets the time offset between the I and Q vectors.
In an I/Q modulator without I/Q skew, the I and Q vectors are aligned to the marker.
With an I/Q skew, both vectors are shifted relative to the marker so that the offset of
each of the vectors to the marker will be the half of the I/Q skew value.
A positive I/Q skew means that the Q vector delays relative to the I vector and vice
versa.
Remote command:
[:SOURce<hw>]:BB:IMPairment:SKEW
[:SOURce]:BB:IMPairment:IQOutput<ch>:SKEW
IQ Delay
Sets the time delay of both I and Q vectors relative to the selected trigger and marker
or relative to the other instrument(s) working in the master-slave synchronous mode.
A positive value means that the I and Q vectors delay relative to the marker/trigger or
to the other instrument and vice versa.
Remote command:
[:SOURce<hw>]:BB:IMPairment:DELay
[:SOURce]:BB:IMPairment:IQOutput<ch>:DELay
Optimize internal IQ-Impairments for RF Output
Activates/ deactivates internal compensation of signal distortions of the RF output. Sig-
nal distortions can be optimized for the RF output (active).
Remote command:
[:SOURce<hw>]:BB:IMPairment:OPTimization:STATe
7.4 I/Q Analog Output Settings
The I/Q Analog Output requires option Differential Analog I/Q Outputs R&S
SGT-K16.
I/Q Analog Output Settings