R&S SGT100A, Руководство пользователя

Страница: 424 / 593

Remote Control Commands
R&S
®
SGT100A
393 User Manual 1176.8674.02 ─ 07
Parameters:
<Mode> UNCHanged | HIGHest | USER
UNCHanged
The segments are output with the clock rate defined in the wave-
form file.
HIGHest
The segments are output at the highest available clock rate.
USER
The segments are output with the clock rate defined with com-
mand
[:SOURce<hw>]:BB:ARBitrary:WSEGment:
CONFigure:CLOCk
*RST: UNCHanged
Example: BB:ARB:WSEG:CONF:CLOC:MODE UNCH
selects clock mode unchanged. The segments are output with
the clock rate defined in the waveform file.
Manual operation: See " Clock " on page 89
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent <Comment>
This command enters a comment for the configuration file. The configuration file must
be specified with command
:BB:ARB:WSEG:CONF:SEL
.
Parameters:
<Comment> string
Example: BB:ARB:WSEG:CONF:COMM <3gpp_up>
enters comment "3gpp_up".
Manual operation: See " Comment " on page 87
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete <Filename>
Deletes the configuration file. The configuration files are used to create multi segment
waveform files.
Setting parameters:
<Filename> string
Example: MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:DEL 'multi1'
deletes configuration file
multi1.inf_mswv
.
Usage: Setting only
Manual operation: See " Delete " on page 88
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:LEVel[:MODE] <Mode>
This command selects the level mode for the multi segment waveform.
SOURce Subsystem