R&S SGT100A, Руководство пользователя

Страница: 423 / 593

Remote Control Commands
R&S
®
SGT100A
392 User Manual 1176.8674.02 ─ 07
Usage: Setting only
Manual operation: See " Clock Rate " on page 88
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CATalog?
Queries the available configuration files in the specified default directory. The configu-
ration files are used to create multi segment waveform files.
Return values:
<Catalog> string
Example: MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:CAT?
reads out all the configuration files in the default directory.
Response: mulit1, multi2
the directory contains the configuration files
multi1.inf_mswv
and
multi2.inf_mswv
.
Usage: Query only
Manual operation: See " Load List " on page 85
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk <Clock>
This command defines the clock rate used for multi segment waveform output in case
of Clock Mode "User" (
:BB:ARB:WSEG:CONF:CLOCk:MODE USER
).
Parameters:
<Clock> float
Increment: 1E-3
*RST:
max SampleRate
Example: BB:ARB:WSEG:CONF:CLOC:MODE USER
selects Clock Mode User.
BB:ARB:WSEG:CONF:CLOC 50MHz
defines a clock rate of 50 MHz.
Manual operation: See " User Clock Rate " on page 90
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE <Mode>
Selects the clock rate mode for the multi segment waveform.
SOURce Subsystem