R&S OSP
Applications
Operating Manual 1505.3896.12 - 14
173
8
Applications
The following chapter provides an overview on the application of the R&S OSP within
EMC systems and the use with the application software R&S EMC32 as well as with
other software platforms.
A description on system extension and usage of particular R&S OSP modules is
included.
8.1 R&S OSP and R&S EMC32 Software
The Measurement Software EMC32 is the R&S application software for
electromagnetic interference (EMI) and electromagnetic susceptibility (EMS)
measurement tasks.
The R&S EMC32 software already is prepared to support the R&S OSP. The following
chapter shows the required steps for the integration of the R&S OSP and its use with
the R&S EMC32 software.
The R&S OSP together with the different R&S OSP modules can be configured for the
different switching tasks as they are required for EMI and EMS measurements.
8.1.1 Configuration of the R&S EMC32 for R&S OSP
The following steps require knowledge on the operation of the EMC32 software. There
are no explanations given concerning the use of the EMC32; for details of the
operation of the EMC32 refer to the manual “R&S EMC Measurement Software
EMC32”.
As a first step, the new device R&S OSP is to be added to the EMC32 device list.
With the EMC32 software started, the function >Extras >Device List is selected. The
dialog for the EMC32 device configuration will be displayed.
