Instrument Tour
R&S
®
NRX
17
Getting Started 1424.7070.02 ─ 04
Creates a screenshot of the current display.
[1Trig] / Delete
●
Controls the measurements depending on the trigger mode:
–
For all trigger modes except "Single", starts and stops the measurement.
–
For the "Single" trigger mode, enables and triggers the measurement.
Changes of the trigger state apply to all measurements.
●
Resets the auxiliary values that provide additional information about the measured
values.
●
Deletes numbers or text in a field so that you can enter a new value.
Enter
Confirms entries in text fields, dialogs and selections in lists.
[Freq]
Sets the carrier frequency of the applied signal. This value is used for frequency-
response correction of the measurement result.
Favorites
Reserved for future use.
[Preset]
Pressing [Preset] opens the "Save / Recall / Preset" dialog.
If you press [Preset] again, the function "Preset" starts.
●
Sets the R&S NRX to its default setting. Default settings are sensor specific.
●
Sets the R&S NRX to a setting selected from the recall list.
[Zero]
Pressing [Zero] opens the "Zeroing Sensors" dialog.
If you press [Zero] again, "Zero All Sensors" starts.
●
Starts the zero calibration.
●
Displays zeroing status.
●
Displays sensor status.
Front Panel Tour
