Remote Control Commands
R&S
®
NRX
367
User Manual 1178.5566.02 ─ 05
<msec>
SYSTem:TIME:LOCal
<hour>, <minute>, <second>
Sets the local time.
Parameters:
<hour>
hh
<minute>
mm
<second>
ss
Manual operation:
See
SYSTem:TIME:UTC
<hour>, <minute>, <second>
Sets the time in the coordinated universal time (UTC).
Parameters:
<hour>
hh
<minute>
mm
<second>
ss
Manual operation:
See
SYSTem:TZONe
<hour>, <minute>
Specifies the offset of the local time to the UTC time, due to the time zone. There can
be an additional offset due to daylight saving time (DST).
Changing the time zone (offset) does not affect an eventual DST offset and the time
zone configured using
.
The local time is calculated as:
local time = UTC + time zone DST offset
.
Parameters:
<hour>
Range:
-12 to 15
<minute>
Range:
-59 to 59
14.12.9
Standardized Signal Configuration
......................................................................................... 368
........................................................................................... 368
...................................................................................... 368
SYSTem:STANdard:TRIGger:SOURce
.............................................................................368
System Information and Configuration