R&S NRX-B4, Руководство пользователя

Страница: 104 / 450

Sensor Configuration
R&S
®
NRX
104 User Manual 1178.5566.02 ─ 05
9 Sensor Configuration
Access: "Measurement Settings" > "Primary Sensor Config" or "Secondary Sensor
Config"
You can define two sensor configurations in parallel, a primary and a secondary sensor
configuration. To these configurations, you can assign a sensor that is connected to
one of the sensor ports of the R&S NRX. These sensors are called primary sensor and
secondary sensor.
Further information:
●
"Primary Sensor, Secondary Sensor" on page 61
●
Chapter 8, "Measurement Types and Result Displays" , on page 63
● Mode Settings ....................................................................................................... 104
● Correction Settings ................................................................................................108
● Filter Settings .........................................................................................................111
● Range Settings ......................................................................................................115
● For NRT Measurement Type .................................................................................117
9.1 Mode Settings
Access:
"Measurement Settings" > "Primary Sensor Config" > "Mode"
"Measurement Settings" > "Secondary Sensor Config" > "Mode"
Available for all measurement types.
Mode Settings