R&S NRPxxS Series, Руководство пользователя, Страница: 44 / 184

Browser-Based User Interface
R&S
®
NRPxxS(N)
44 User Manual 1177.5079.02 ─ 10
<State> ← Offset
Enables or disables the usage of the level offset.
Remote command:
[SENSe<Sensor>:]CORRection:OFFSet:STATe
on page 111
<Value> ← Offset
Adds a fixed level offset in dB to account for external losses.
Remote command:
[SENSe<Sensor>:]CORRection:OFFSet
on page 111
S-Parameter
Selects the mode used for the S-parameters. S-parameters are used to compensate
for a component (attenuator, directional coupler) connected ahead of the sensor.
Averaging
See "Averaging Mode" on page 52.
6.4 Measurement Modes
Describes the parameters for the available measurement modes.
● Continuous Average Mode ......................................................................................44
● Burst Mode ..............................................................................................................45
● Timeslot Mode .........................................................................................................46
● Trace Mode ............................................................................................................. 47
6.4.1 Continuous Average Mode
Describes the parameters of the continuous average measurement.
Further information:
●
Chapter 9.7.1, "Continuous Average Measurement" , on page 93
Detailed description of the continuous average mode and its remote commands
Access: main dialog of the web user interface > navigation pane > "Continuous Aver-
age"
Aperture Time ................................................................................................................45
Duty Cycle .....................................................................................................................45
Smoothing ..................................................................................................................... 45
Measurement Modes