Remote commands to perform measurements in MSRA mode
R&S
®
FSWP-B1
99
User Manual 1177.5862.02 ─ 09
Usage:
Query only
TRACe:IQ:WBANd[:STATe]
<State>
This command determines whether the wideband provided by bandwidth extension
options is used or not (if installed).
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation:
See
TRACe:IQ:WBANd:MBWidth
<Limit>
Defines the maximum analysis bandwidth. Any value can be specified; the next higher
fixed bandwidth is used.
Parameters:
<Limit>
80 MHz
Restricts the analysis bandwidth to a maximum of 80
MHz.
The bandwidth extension option R&S
FSWP-B320 is deactiva-
ted.
160 MHz
Restricts the analysis bandwidth to a maximum of 160 MHz. The
bandwidth extension option R&S
FSWP-B320 is deactivated.
160 MHz | MAX
The bandwidth extension option is activated. The currently avail-
able maximum bandwidth is allowed.
*RST:
maximum available
Default unit: Hz
Example:
TRAC:IQ:WBAN:MBW 82 MHZ
TRAC:IQ:WBAN:MBW?
160000000
Manual operation:
See
9.4.4
Adjusting settings automatically
The following remote commands are required to adjust settings automatically in a
remote environment. These commands are only available for the MSRA primary chan-
Configuring MSRA measurements