R&S FSW Series, Руководство пользователя

Страница: 168 / 1450

Measurements and Results
R&S
®
FSW
168 User Manual 1173.9411.02 ─ 43
7.2.4 Channel Power Configuration
Access : "Overview" > "Select Measurement" > "Channel Power ACLR" > "CP / ACLR
Config"
Both Channel Power (CP) and Adjacent-Channel Power (ACLR) measurements are
available.
If the "Multi-Standard Radio" standard is selected (see "Standard" on page 169), the
"ACLR Setup" dialog box is replaced by the "MSR ACLR Setup" dialog box. See Chap-
ter 7.2.5, "MSR ACLR Configuration" , on page 177 for a description of these settings.
The remote commands required to perform these tasks are described in Chap-
ter 14.5.3, "Measuring the Channel Power and ACLR" , on page 841.
● General CP/ACLR Measurement Settings ............................................................168
● Channel Setup ...................................................................................................... 174
7.2.4.1 General CP/ACLR Measurement Settings
General measurement settings are defined in the "ACLR Setup" dialog, in the "General
Settings" tab.
Standard ......................................................................................................................169
└ Predefined Standards ................................................................................... 169
└ User Standards ............................................................................................. 169
Channel Power and Adjacent-Channel Power (ACLR) Measurement