R&S FSVA3000 Series, Руководство пользователя

Страница: 1051 / 1268

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1051 User Manual 1178.8520.02 ─ 01
Compared to shifting the limit line, an offset does not actually change the limit line defi-
nition points.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<Offset> Numeric value.
*RST:
0
Default unit: dB
Manual operation: See " Y-Offset " on page 477
CALCulate<n>:LIMit<li>:UPPer:SHIFt <Distance>
This command moves a complete upper limit line vertically.
Compared to defining an offset, this command actually changes the limit line definition
points by the value you define.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<Distance> Defines the distance that the limit line moves.
The unit depends on
CALCulate<n>:LIMit<li>:UNIT
on page 1049.
Manual operation: See " Shift y " on page 480
CALCulate<n>:LIMit<li>:UPPer:SPACing <InterpolType>
This command selects linear or logarithmic interpolation for the calculation of an upper
limit line from one horizontal point to the next.
Suffix:
<n>
.
Window
<li> Limit line
Parameters:
<InterpolType> LINear | LOGarithmic
*RST:
LIN
Manual operation: See " Y-Axis " on page 479
CALCulate<n>:LIMit<li>:UPPer:STATe <State>
This command turns an upper limit line on and off.
Before you can use the command, you have to select a limit line with
CALCulate<n>:
LIMit<li>:NAME
on page 1049.
Analyzing Measurements (Basics)