Saving/Exporting Data (File)
R&S FS300
E-1007.9900.15
7-230
Operating manual, 02/2006
Inserting limit lines
1.
Tick the check boxes for
Lower Line
and/or
Upper Line
to activate the
limit line(s).
2.
Click
<APPLY>
to activate the limit line(s). The status information
Upp
and/or
Low
are displayed in the diagram.
Saving and loading
limit lines
1.
Press
<SAVE>
if you plan to use the current settings again.
The
Save File as
window opens.
2.
Select a directory, enter a file name and click
<Save>
. The current set-
tings are saved.
3.
Press
<LOAD>
if you wish to use the saved settings again.
The
File open
window opens.
4.
Select the (
.lim
) file from your directory and click
<Open>
. The saved
settings (frequency and amplitude values) are loaded.
Closing the window
•
Press
<OK>
to close the
Edit Limit Lines
window. The current settings
remain active in the diagram.
Содержание FS300
Страница 1: ...2 2006...
Страница 16: ......
