R&S FS300, Руководство по эксплуатации

Страница: 229 / 248

R&S FS300 Saving/Exporting Data (File)
Operating manual, 02/2006 7-229 E-1007.9900.15
2.
Use the left-hand table to enter the frequency and amplitude values for
the lower lines and use the right-hand table to enter the upper lines.
Each row in the table describes a reference point on the limit line. At
least 2 value pairs (reference points) per line must be entered, e.g., lower
line: -80 dB for full span.
NOTE:
You may increase and decrease the amplitude values of a limit
line for all value pairs with the input fields:
change lower
/
change upper
.
You may increase and decrease the frequency values of a limit line for all
value pairs with the input fields:
change frequency [MHz]
.