LTE PRACH Measurement
R&S
®
CMW-KM5xx/-KS5xx
795
User Manual 1173.9628.02 ─ 16
TRIGger:LTE:MEAS<i>:PRACh:CATalog:SOURce?
..........................................................795
TRIGger:LTE:MEAS<i>:PRACh:SOURce
......................................................................... 795
TRIGger:LTE:MEAS<i>:PRACh:SLOPe
........................................................................... 795
TRIGger:LTE:MEAS<i>:PRACh:THReshold
......................................................................796
TRIGger:LTE:MEAS<i>:PRACh:TOUT
............................................................................. 796
TRIGger:LTE:MEAS<i>:PRACh:MGAP
............................................................................ 796
TRIGger:LTE:MEAS<i>:PRACh:CATalog:SOURce?
Lists all trigger source values that can be set using
.
Return values:
<Sourcelist>
Comma separated list of all supported values. Each value is rep-
resented as a string.
Usage:
Query only
Firmware/Software:
V2.0.10
Manual operation:
See
TRIGger:LTE:MEAS<i>:PRACh:SOURce
<Source>
Selects the source of the trigger events. Some values are always available in this firm-
ware application. They are listed below. Depending on the installed options additional
values may be available. A complete list of all supported values can be displayed using
TRIGger:...:CATalog:SOURce?
.
Parameters:
<Source>
'IF Power':
Power trigger (received RF power)
'Base1: External TRIG A':
External trigger fed in at TRIG A
connector
'Base1: External TRIG B':
External trigger fed in at TRIG B
connector
*RST:
'IF Power'
Example:
See
Configuring the Trigger System
Firmware/Software:
V2.0.10
Manual operation:
See
TRIGger:LTE:MEAS<i>:PRACh:SLOPe
<Slope>
Qualifies whether the trigger event is generated at the rising or at the falling edge of
the trigger pulse (valid for external and power trigger sources).
Command Reference
深圳德标仪器
135-1095-0799