LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
653
User Manual 1173.9628.02 ─ 16
Example:
See
Firmware/Software:
V3.2.70
V3.2.80: <no> of areas enhanced to 12
Options:
R&S CMW-KM502/-KM552 for FDD/TDD
3.5.3.14
Limits (Power)
The following command defines limits for results which characterize the power dynam-
ics of the signal.
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:PDYNamics:CBANdwidth<Band>
<Enable>, <OnPowerUpper>, <OnPowerLower>, <OffPowerUpper>
Defines limits for the ON power and OFF power determined with the power dynamics
measurement. Separate limits can be defined for each channel bandwidth.
Suffix:
<Band>
.
14,30,50,100,150,200
Channel bandwidth in 0.1 MHz
Parameters:
<Enable>
OFF | ON
OFF
: disables the limit check
ON
: enables the limit check
*RST:
ON
Default unit: n/a
<OnPowerUpper>
Upper limit for the "ON power"
Range:
-256 dBm to 256 dBm
*RST:
depends on channel bandwidth, see below
Default unit: dBm
<OnPowerLower>
Lower limit for the "ON power"
Range:
-256 dBm to 256 dBm
*RST:
depends on channel bandwidth, see below
Default unit: dBm
<OffPowerUpper>
Upper limit for the "OFF power" and the "SRS OFF" power
Range:
-256 dBm to 256 dBm
*RST:
-48.5 dBm
Default unit: dBm
Example:
See
Firmware/Software:
V2.0.10
<Band>
*RST <OnPowerUpper>
*RST <OnPowerLower>
14
-7.3 dBm
-22.3 dBm
30
-3.3 dBm
-18.3 dBm
50
-1.1 dBm
-16.1 dBm
Command Reference
深圳德标仪器
135-1095-0799