LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
475
User Manual 1173.9628.02 ─ 16
<RessourceState>
QUE | ACT | INV
QUE:
measurement without resources, no results available
("queued")
ACT:
resources allocated, acquisition of results in progress but
not complete ("active")
INV:
not applicable because <main_state>: OFF or RDY ("inva-
lid")
Usage:
Query only
Firmware/Software:
V3.2.80
Manual operation:
See
2.6.20.2
Measurement Settings
The following commands configure the "RLC Throughput" measurement.
CONFigure:LTE:SIGN<i>:THRoughput:TOUT
...................................................................475
CONFigure:LTE:SIGN<i>:THRoughput:REPetition
............................................................ 475
CONFigure:LTE:SIGN<i>:THRoughput:UPDate
................................................................ 476
CONFigure:LTE:SIGN<i>:THRoughput:WINDow
...............................................................476
CONFigure:LTE:SIGN<i>:THRoughput:TOUT
<Timeout>
Defines a timeout for the measurement. The timer is started when the measurement is
initiated via a
READ
or
INIT
command. It is not started if the measurement is initiated
manually (ON/OFF key or RESTART/STOP key).
When the measurement has completed the first measurement cycle (first single shot),
the statistical depth is reached and the timer is reset.
If the first measurement cycle has not been completed when the timer expires, the
measurement is stopped. The measurement state changes to
RDY
and the reliability
indicator is set to 1, indicating that a measurement timeout occurred. Still running
READ
,
FETCh
or
CALCulate
commands are completed, returning the available results.
At least for some results there are no values at all or the statistical depth has not been
reached.
A timeout of 0 s corresponds to an infinite measurement timeout.
Parameters:
<Timeout>
Default unit: s
Firmware/Software:
V3.2.80
CONFigure:LTE:SIGN<i>:THRoughput:REPetition
<Repetition>
Specifies whether the measurement is stopped after a single shot (window size) or
repeated continuously.
Command Reference
深圳德标仪器
135-1095-0799