R&S AFQ100A
File Management
1401.3078.62 3.28
E-3
Select / Save Lists - File Management
File select windows as
Load Waveform
,
Select List
or
New List
offer access to functions for loading
and saving user data. Lists, Complex modulation and control data or Waveforms are handled within
these windows.
A file select menu consists of several areas.
In the upper area
recent data sets
the files last used are listed; a maximum of ten files is displayed.
The available drives and directories are displayed on the left side, the files of the selected directory on
the right side. The currently selected path is displayed above the windows. Only the relevant files are
displayed without file extensions. If the area is opened several times, the path last selected is displayed.
When a file is saved or created, its name is user-selectable; the extension is assigned automatically
and cannot be entered. The file is saved to the selected path.
Operation is similar to the operation of menus with several areas (see section "
Dialog Area - Setting Parameters
By using the cursor keys, the area is marked; the entry focus is shifted to this area by using the
Enter
key. The up/down cursor keys will then navigate only within this area. By using the left/right cursor keys,
it is possible to switch between the directory tree and the file list. The subdirectories of the selected
directory will only be displayed after a short delay to allow quick navigation in the directory tree.
Pressing the
Esc
key again shifts the entry focus up one level. The button for saving or loading the file
can be selected and pressed. After selecting the file, a menu is closed automatically.