Remote control commands
R&S
®
LCX Series
186
User Manual 1179.2260.02 ─ 02
Example:
See
Example "Setting correction prameters"
CORRection:USE:DATA:SINGle
<Use single data state>
Activates the correction value for a test point when you measure a single component.
Parameters:
<Use single data
state>
1 | 0 | ON | OFF
*RST:
0|OFF
Example:
See
Example "Setting correction prameters"
CORRection:USE:DATA[:MULTi]
<Use multi data state>
Activate the correction value for a test point when you measure a component group.
Parameters:
<Use multi data
state>
1 | 0 | ON | OFF
*RST:
0|OFF
Example:
See
Example "Setting correction prameters"
CORRection:USE[:CHANnel]
<Channel>
Selects the channel for multimode measurement correction.
Activate multimode with command
Parameters:
<Channel>
Range:
0 to 127
*RST:
0
Example:
See
Example "Setting correction prameters"
11.7
DATA subsystem
The
DATA
subsystem contains the commands for managing files and data.
DATA subsystem