Remote Control Commands
R&S
®
NRX
337
User Manual 1178.5566.02 ─ 07
<Channel>
1 to 2
1 = forward, 2 = reflection (reverse)
Parameters:
<value>
EFULl | E5M | E1M5 | E0M3
EFULl
Full
E5M
5
MHz
E1M5
1.5
MHz
E0M3
300
kHz
*RST:
EFULl
Manual operation:
See
13.7.5
Sensor Ranges
Further information:
●
CALCulate<Measurement>[:CHANnel<Channel>]:INPut:ATTenuation:AUTO
CALCulate<Measurement>[:CHANnel<Channel>]:INPut:ATTenuation[:VALue]
CALCulate<Measurement>[:CHANnel<Channel>][:POWer][:AVG]:RANGe:AUTO
CALCulate<Measurement>[:CHANnel<Channel>][:POWer][:AVG]:RANGe:CLEVel:STATe
CALCulate<Measurement>[:CHANnel<Channel>][:POWer][:AVG]:RANGe:CLEVel[:VALue]
CALCulate<Measurement>[:CHANnel<Channel>][:POWer][:AVG]:RANGe[:VALue]
CALCulate<Measurement>[:CHANnel<Channel>]:INPut:ATTenuation:AUTO
<auto>
Requires an R&S
frequency selective power sensor.
Enables or disables the automatic setting of the input attenuation.
Suffix:
<Measurement>
.
1 to 8
Measurement
<Channel>
1 to 2
1 = primary sensor, 2 = secondary sensor
Parameters:
<auto>
OFF | ON | ONCE
ONCE
Adjusts the input attenuation one time, then disables the auto-
matic setting.
*RST:
OFF
Manual operation:
See
Configuring Sensors
www.allice.de
Allice Messtechnik GmbH