LM16-20-25 I&M MANUAL/EN/11.30.2010
38/73
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
6.14 Hook Inspection
The wear on the top hook and the load hook shall be checked routinely. Measure the throat opening
(dimension
a
2). If the throat opening exceeds the maximum opening allowed (1.15 x a2), replace the hook.
Damaged safety latches shall be replaced immediately.
Maximum throat opening allowed:
Hook class:
05T
08T
1T
16T
Top Hook
Maximum allowed
opening:
1.54”
[39mm]
1.69”
[43mm]
1.81”
[46mm]
2.01”
[51mm]
2.13”
[54mm]
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
