Physiolaser
olympic 500
Version 1.4 June 2007
25
Operational modes
The
Physiolaser
olympic
will indicate 3 modes of operation:
Standby, Ready, Power-
save
.
After switching on the
Physiolaser
olympic
the condition of the battery and contact to
the mains current supply will be checked, thereafter the
Physiolaser
olympic
will
control if any probe is connected and will identify the probe. Thereafter the unit will step
into Stand-by mode. In the Stand-by mode you can go forward to Ready mode or to
Service.
Stand-by
Leave the Stand-by mode by pressing the button
Ready
in order to reach the Ready
mode. In the Ready mode you can select frequencies, modify the power settings and
start the laser beam.
Laser Ready
The laser is ready if the main therapy screen is displayed. Start the laser by pressing
button “
Start/stop
” on the probe. Pressing Stand-by again will lead to the Stand-by
mode.
Power save:
The display indicates POWER SAVE
Start of the Stand-by mode via the Stand-by button (other buttons are not in use).
Before starting the therapy mode
1. Connect the laser probe to one of the sockets named
LASER
.
2. Check if the safety plug is connected to the socket “
REMOTE LASER STOP
“ the
“
EMERGENCY STOP”
button was not activated (not pressed).
3. Turn the key switch to position “ON“.
Thereafter the display will indicate
Stand-by mode
, and buttons to reach the
Therapy
and
Service
mode. Press any of the buttons to proceed.
