Page
9
of
22
LP0294
R&G
Unit
1
, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)
1
420 89007 Fax: +44 (0)
1
420 87301 www.rg-racing.com Email: [email protected]
•
Feed the indicator wiring through the hole on the licence plate bracket, positioning the raised
boss on the adaptor within the hole, before positioning a second mini indicator adaptor (
item
5
–
I0016
) (with the boss facing toward the indicator) over the wiring and into the hole on the
bracket, before fitting the indicator nut over the wiring and tighten onto the threaded stalk of
the indicator, as shown in picture 19.
•
Fit the other indicator the same way in the remaining indicator mount.
•
Take one indicator wiring cover (
item 7
–
IWC0002
) and thread this over the exposed wire
(some liquid soap or lubricant may help with this) and slide down the wire to cover the exposed
thread of the indicator.
•
Cut the original indicator connectors from the OEM indicators leaving enough wire to attach the
CON0004 (
item 8
) to resemble the picture below. Attach this to the bullet connectors of the
Mini indicators.
