R&G LP0185BK, Инструкция по монтажу

Страница: 11 / 28

Picture 51 Picture 52
Picture 53 Picture 54
FITTING INSTRUCTIONS

To fit the R&G tail tidy, remove the seat using the key at the rear of the bike, as shown in picture
1.

Remove the four Torx bolts that secure the plastic mudguard in place, as shown in pictures 2 & 3.

Gently pull this forward to remove it from the rubber mounts at the rear and clear of the bike, as
shown in picture 4.

If the pannier rack is fitted, remove the two luggage mounting points, one on either side of the
bike, as shown in picture 5.

This now allows access to the rack mounting bolts. Remove all of these, two on either side of the
bike, and remove the pannier rack, as shown in pictures 6 & 7.

Remove the final two bolts that secure the aluminium luggage frame in place and remove from the
bike, as shown in picture 8.

Within the rear subframe, there is a large plastic tray which most of the bodywork attaches too, as
shown in picture 9. We advise to check this tray and all the panels are fitted centrally to ensure the