R&G LP0092BK, Инструкция по монтажу

Страница: 3 / 10


REMOVE PLASTIC ALARM MOUNTING BRACKET (GENTLY SQUEESE AND
TWIST TO UNCLIP FROM REAR SUB-FRAME). THIS ALLOWS CABLE TO GO
THROUGH ACCESS HOLE.

REMOVE THREE BOLTS FROM THE UNDERSIDE (SEE PICTURE 3 FOR POSITION)
TO ALLOW ORIGINAL LICENCE PLATE BRACKET TO BE REMOVED (KEEP THE
BOLTS AS THESE ARE REUSED TO MOUNT NEW LICENCE PLATE ADAPTOR
PLATE).

INSERT THE THREE LARGER RUBBER GROMMETS INTO THE LICENCE PLATE
ADAPTOR PLATE (SEE PICTURE 4), AN APLICATION OF WASHING UP LIQUID
AIDS THIS PROCESS.
PICTURE
3
PICTURE
4

MOUNT THE LICENCE PLATE ADAPTOR PLATE ONTO MOUNTING SPIGOTS AS
THE ORIGINAL WAS MOUNTED AND USING THE ORIGINAL BOLTS SECURE IN
POSITION (SEE PICTURE 3).

IF USING ORIGINAL INDICATORS (TURN SIGNALS), REMOVE FROM ORIGINAL
LICENCE PLATE BRACKET AND FIT TO NEW LICENCE PLATE BRACKET AS
ORIGINAL (YOU WILL HAVE TO STRIP BACK THE WIRING LOOM TO SEPARATE
WIRES FOR THE REMOVAL PROCESS).

FIT NEW LICENCE PLATE LIGHT TO NEW LICENCE PLATE BRACKET (SEE
PICTURE 5). WE SUGGEST CUTTING AND SPLICING INTO ORIGINAL PLUG
SOCKET USING THE CONNECTORS FROM KIT. PROTECT WIRES USING HEAT
SHRINK FROM KIT.
THE ORIGINAL GREEN WIRE ------NEW RED WIRE.
THE ORIGINAL BROWN WIRE (EARTH) ------NEW BLACK WIRE.

PLEASE NOTE YOU WILL NEED TO GLUE THE LIGHT SHROUD TO THE LED
LICENCE PLATE LIGHT BEFORE FITTING, USING SUPER GLUE.

FEED THE LICENCE PLATE LIGHT WIRE THROUGH THE RECTANGULAR HOLE
IN THE NEW LICENCE PLATE BRACKET AND THEN THROUGH THE OVAL HOLE
(SEE PICTURE 5).

MOUNT THE NEW LICENCE PLATE BRACKET ONTO THE LICENCE PLATE
ADAPTOR PLATE USING THE FIVE M6x6mm LONG BUTTON HEAD BOLTS AND
SECURE (SEE PICTURE 3).

FEED ALL WIRES THROUGH THE IRREGULAR SHAPED HOLE IN THE LICENCE
PLATE ADAPTOR PLATE AND THROUGH THE BODY WORK INTO THE UNDER-
SEAT STORAGE SPACE (SEE PICTURE 6).