10
800-621-8560
To lower temperature in the refrigerated rail:
A. Push and hold the
“set”
button until 34 appears and then release the
“set” button. 34 is the current set point temperature.
B. Push and release the up arrow 2
times
until 32 is displayed. Push and
release the
“set”
button one
time.
The new set point, 32, will flash 3
times and then will be locked in.
NOTE
:
It is recommended to only make changes of 2 degree increments
at a time. Allow for the unit to operate 24 hours between adjustments. If
the 2 degree adjustment is not enough another adjustment can be made.
The maximum highest setting is 38 degrees and the minimum lowest
setting is 28 degrees. If the settings need to go above or below this point
there may be other contributing factors as to the cause of the
temperature variances, please contact the factory at 1-800-621-8560.
The base te
m
perature
c
an also be adjusted by the te
m
perature
c
ontrol dial lo
c
ated
on the front of the refrigeration
c
oil inside the refrigerated base. The ther
m
o
m
eter
for the base te
m
perature is lo
c
ated in the
m
e
c
hani
c
al housing (Figure 1, ite
m
b).
To raise the temperature in the refrigerated base:
A. Push and hold the
“set”
button until 34 appears then release the
“set”
button. 34 is the current set point temperature.
B. Push and release the up arrow 2
times
until 36 is displayed. Push and
release the
“set”
button one
time.
The new set point, 36, will flash 3
times and then will be locked in.
To lower temperature in the refrigerated base:
A. Push and hold the
“set”
button until 34 appears and then release the
“set” button. 34 is the current set point temperature.
B. Push and release the up arrow 2
times
until 32 is displayed. Push and
release the
“set”
button one
time.
The new set point, 32, will flash 3
times and then will be locked in.
NOTE
:
It is recommended to only make changes of 2 degree increments at a
time. Allow for the unit to operate 24 hours between adjustments. If the 2
degree adjustment is not enough another adjustment can be made. The
maximum highest setting is 38 degrees and the minimum lowest setting is
28 degrees. If the settings need to go above or below this point there may be
other contributing factors as to the cause of the temperature variances,
please contact the factory at 1-800-621-8560.
