RAMVAC OWL TOUCH, Руководство пользователя

Страница: 14 / 15

1056DOC – REV E
Page 14
OWL SYSTEM OPERATION
Two “Run Modes” are available from the OWL Touch “Home Screen”. The system can be operated in
either “Manual” or “By Schedule” modes to turn on connected equipment.
MANUAL MODE
This mode allows connected equipment to be turned off and on using the four ON/OFF buttons
directly above the run mode box. These buttons are comparable to traditional wall panel push buttons
that simply turn equipment on or off.
BY SCHEDULE
Select this mode to have all connected equipment turn on and off automatically per the weekly
schedule that was programmed earlier in this procedure.
MASTER SHUTDOWN
When “Master Shutdown” is selected the button will turn red which indicates the system is off and will
not run according to the Schedule. Devices also cannot be operated using the on/off buttons as
when in manual mode. All RAMVAC vacuum pumps and compressors will remain in stand-by until
one of the two run modes is activated.
Note this is not a safety interlock. See vacuum unit and/or
compressor user manual for guidelines on electrical and pneumatic isolation for maintenance
procedures.