hours separately, which are indicated in the display. And you can adjust your desired
temperature and time by following the operation specified in the section of
“SET THE
TEMPERATURE AND TIME MANUALLY”
, and the display will indicate the new
temperature and time.
NOTE:
The appliance will enter into the standby mode if there is not any operation
within 10 minutes after the appliance is powered on. At that time, only the Power button
“ ” and its corresponding indicator are activated while other buttons and their
corresponding indicator are deactivated. And you can press the Power button “ ” to
activate all the functional buttons and indicators.
2. Put the wire rack into the frying tank and then evenly add a layer of fruits which
have been cut well and are of uniform thickness on the wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”,
then the appliance starts to work.
NOTE:
During working, press the Start/Stop button “ ”, its corresponding indicator
flashes and the appliance will pause working. Press the Start/Stop button “ ” again,
the appliance will continue to work. To make the appliance stop working, hold and
press the Start/Stop button “ ”.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Shrimp
1. Connect the appliance with power source. One beep can be heard and all the
indicators on the control panel illuminate. Press Menu button “ ” to select the
“Shrimp” “
”, and the default temperature and time of “Shrimp” setting are 180
℃
and 12 minutes separately, which are indicated in the display. And you can adjust your
desired temperature and time by following the operation specified in the section of
“SET THE TEMPERATURE AND TIME MANUALLY”
, and the display will
indicate the new temperature and time.
NOTE:
The appliance will enter into the standby mode if there is not any operation
within 10 minutes after the appliance is powered on. At that time, only the Power button
“ ” and its corresponding indicator are activated while other buttons and their
corresponding indicator are deactivated. And you can press the Power button “ ” to
activate all the functional buttons and indicators.
2. Put the wire rack into the frying tank and then evenly add a layer of shrimps on the
wire rack.
