then the appliance starts to work.
NOTE:
During working, press the Start/Stop button “ ”, its corresponding indicator
flashes and the appliance will pause working. Press the Start/Stop button “ ” again,
the appliance will continue to work. To make the appliance stop working, hold and
press the Start/Stop button “ ”.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Beefsteak
1. Connect the appliance with power source. One beep can be heard and all the
indicators on the control panel illuminate. Press Menu button “ ” to select the
“Beefsteak” “
”, and the default temperature and time of “Beefsteak” setting are
200
℃
and 25 minutes separately, which are indicated in the display. And you can
adjust your desired temperature and time by following the operation specified in the
section of
“SET THE TEMPERATURE AND TIME MANUALLY”
, and the display
will indicate the new temperature and time.
NOTE:
The appliance will enter into the standby mode if there is not any operation
within 10 minutes after the appliance is powered on. At that time, only the Power button
“ ” and its corresponding indicator are activated while other buttons and their
corresponding indicator are deactivated. And you can press the Power button “ ” to
activate all the functional buttons and indicators.
2. Put the wire rack into the frying tank and then evenly add a layer of beefsteaks on
the wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”,
then the appliance starts to work.
NOTE:
During working, press the Start/Stop button “ ”, its corresponding indicator
flashes and the appliance will pause working. Press the Start/Stop button “ ” again,
the appliance will continue to work. To make the appliance stop working, hold and
press the Start/Stop button “ ”.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Dry fruit
1. Connect the appliance with power source. One beep can be heard and all the
indicators on the control panel illuminate. Press Menu button “ ” to select the “Dry
fruit” “ ”, and the default temperature and time of “Dry fruit” setting are 30
℃
and 4
