Description
A Plunger
B Feed-in Tube
C Top Cover
D Filtrate Toil
E Spout
F Segregator
G Motor Unit
H
1
Pulp Container
H
2
Juice Cup
I Lock Cover
J On/Off Switch
How To Assemble
Before first use: unclamp the Lock Cover and carefully disassemble and wash
the plunger, Top Cover, Filtrate Toil (CAUTION: The
“teeth” are sharp),
Segregator, Pulp container and juice cup in soapy water. Rinse and dry. Never
immerse the motor Unit, wipe it with a damp sponge or cloth.
1. Fit the Segregator onto the motor unit.
2. Sit the Filtrate Toil into the hole of the Segregator. When prop
erly “seated”,
it should spin easily.
3. Fit the Top Cover onto the Segregator.
4. Raise the Lock Cover and fit the Tab of each Latch into the Groove on
each side of the Top Cover. Press the bottom of each Latch to lock it in place.
The unit will not operate unless the safety Locking Latches are securely
clamped.
