Ramtech WES3 Скачать руководство пользователя страница 5

succession. All three LEDs will briefly illuminate and then the amber LED will flash.

• This operation activates the unit – no radio connection is established at this point.

3.  Unit Numbering with CONNECT

• Activated Call Points, Sensors, and other WES

3

 units can be added to create a 

WES

3

 network using the Unit Numbering process.

• During Unit numbering, WES

3

 devices receive details of network configuration 

from the CONNECT unit, including Inspection Delay and Pre Alarm settings. This 

is the only way of creating and adding to a WES

3

 network. 

• Access the Unit Numbering option on the CONNECT main menu screen.  This 

can be accessed by selecting Unit Numbering with the appropriate arrow next to 

the screen.

• Ensure that any WES

3

 device to be paired is turned on and has an amber 

flashing LED. This indicates the unit is ready to pair.  

• Units can be numbered any four digit number from 0001 to 9999 in accordance 

with your site plan.  Numbering allows messages and alerts during operation to 

be referenced to a specific unit location on site, using the project site plan. From 

the Unit Numbering screen, use the numeric keypad and/or the + and - buttons to 

select the desired number for your first unit.

• Press and hold ‘A’ on both units. The amber LEDs will illuminate  followed  by  

the  green  LEDs on both units to  indicate  that  the units have been successfully 

paired and a site group created. Release the ‘A’  buttons.

Содержание WES3













Отзывы: