Ramsey Winch Quick-Mount QM5000H, Руководство пользователя

Страница: 6 / 12

6
Assembling your Winch
To assemble your QM winch to the quick mount
channel, attach handles to both ends of the quick
mount channel using (2) black 3/8” button head
screws for each handle as shown below. Tighten
to 20 ft-lbs. torque.
Once the handles are attached, lift the winch into
the quick mount channel. Feed the looped end
of the prewrapped cable through the fairlead.
Place a 3/8” nut and fl atwasher in each of the feet
of the winch. Align the four mounting holes
in the channel with the feet of the winch. Place a
lockwasher on each 3/8” hex head bolt and
press a bolt through each mounting hole and start
it through a nut in the foot of the winch. Do not
tighten until all of the bolts have been start- ed.
Tighten evenly to 34 ft-lbs. torque.
Align the base of the clevis hook with the
loop on the end of the wire cable. Run the pin
through the clevis hook and the loop. Push the
cotter pin through the hole in the pin and bend
the cotter pin to lock
.
20 ft-lbs.
torque
34 ft-lbs.
torque
QM5000H
TM
WINCH ASSEMBLY