Ramsey Electronics FR-10 Скачать руководство пользователя

Страница: 2 / 14

FR-10

RAMSEY TRANSMITTER KITS

FM-10, 25 FM Stereo Transmitters

FM-1,2,3,4 FM Wireless Microphones

PB-1 Telephone Transmitter

RAMSEY RECEIVER KITS

FR-1 FM Broadcast Receiver

AR-1 Aircraft Band Receiver

SR-1 Shortwave Receiver

AA-7 Active Antenna

SC-1 Shortwave Converter

RAMSEY HOBBY KITS

SG-7 Personal Speed Radar

SS-70 Speech Scrambler

TT-1 Telephone Recorder

SP-1 Speakerphone

MD-3 Microwave Motion Detector

PH-10 Peak hold Meter

LC-1 Inductance-Capacitance Meter

RAMSEY AMATEUR RADIO KITS

FX Series VHF and UHF Transceivers

HR Series HF All Mode Receivers

QRP Series HF CW Transmitters

CW-700 Micro Memory CW Keyer

PA Series VHF and UHF Power Amplifiers

Packet Computer Interfaces

QRP Power Amplifiers

RAMSEY MINI-KITS
Many other kits are available for hobby, school, Scouts and just plain FUN.
New kits are always under development. Write or call for our free Ramsey
catalog.

FR-10 10 METER FM RECEIVER KIT INSTRUCTION MANUAL

Ramsey Electronics publication NO. MFR-10 Rev. E

First printing: January 1992

COPYRIGHT 1992 by Ramsey Electronics, Inc. 793 Canning Parkway, Victor, New York
14564. All rights reserved. No portion of this publication may be copied or duplicated without the
written permission of Ramsey Electronics, Inc. Printed in the United States of America.

Y E

LECTR

t k

i t b

u ilders i n t

h e

FR-10

The Ramsey Kit Warranty

Please read carefully BEFORE calling or writing in about your kit. Most
problems can be solved without contacting the factory.

Notice that this is not a "fine print" warranty. We want you to understand your rights and ours too! All
Ramsey kits will work i f assembled properly. The very fact that your kit includes this manual is your
assurance that a team of knowledgeable people have field-tested several "copies" of this kit straight
from the Ramsey Inventory. If you need help, please read through your manual carefully, all
information required to properly build and test your kit is contained within the pages!

1. DEFECTIVE PARTS:

It's always easy to blame a part for a problem in your kit, Before you conclude

that a part may be bad, thoroughly check your wo rk. Today's semiconductors and passive components
have reached incredibly high reliability levels, and it’s sad to say that our human construction skills
have not! But on rare occasions a sour component can slip through. All our kit parts carry the Ramsey
Electronics Warranty that they are free from defects for a full ninety (90) days from the date of
purchase. Defective parts will be replaced promptly at our expense. If you suspect any part to be
defective, please mail it to our factory for testing and replacement. Please send only the defective part
(s), not the entire kit. The part(s) MUST be returned to us in suitable condition for testing. Please be
aware that testing can usually determine if the part was truly defective or damaged by assembly or
usage. Don't be afraid of telling us that you 'blew-it', we're all human and in most cases, replacement
parts are very reasonably priced.

2. MISSING PARTS:

Before assuming a part value is incorrect, check the parts listing carefully to see

if it is a critical value such as a specific coil or IC, or whether a RANGE of values is suitable (such as
"100 to 500 uF"). Often times, common sense will solve a mysterious missing part problem. If you're
missing five 10K ohm resistors and received five extra 1K resistors, you can pretty much  be assured
that the '1K ohm' resistors are actually the 'missing' 10 K parts ("Hum-m-m, I guess the 'red' band
really does look  orange!") Ramsey Electronics project kits are packed with pride in the USA. If you
believe we packed an incorrect part or omitted a part clearly indicated in your assembly manual as
supplied with the basic kit by Ramsey, please write or call us with information on the part you need and
proof of kit purchase

3. FACTORY REPAIR OF ASSEMBLED KITS:

To qualify for Ramsey Electroni cs factory repair, kits MUST:
1. NOT be assembled with acid core solder or flux.
2. NOT be modified in any manner.
3. BE returned in fully-assembled form, not partially assembled.
4. BE accompanied by the proper repair fee. No repair will be undertaken until we have received the

MINIMUM repair fee (1/2 hour labor) of $18.00, or authorization to charge it to your credit card
account.

5. INCLUDE a description of the problem and legible return address. DO NOT send a separate letter;

include all correspondence with the unit. Please do not include your own hardware such as
non-Ramsey cabinets, knobs, cables, external battery packs and the like. Ramsey
Electronics, Inc., reserves the right to refuse repair on ANY item in which we find excessive
problems or damage due to construction methods. To assist customers in such situations,
Ramsey Electronics, Inc., reserves the right to so lve their needs on a case-by-case basis.

The repair is $36.00 per hour, regardless of the cost of the kit. Please understand that our technicians
are not volunteers and that set-up, testing, diagnosis, repair and repacking and paperwork can take
nearly an hour of paid employee time on even a simple kit. Of course, if we find that a part was
defective in manufacture, there will be no charge to repair your kit (But please realize that our
technicians know the difference between a defective part and parts burned out or damaged through
improper use or assembly).

4. REFUNDS:

You are given ten (10) days to examine our products. If you are not satisfied, you may

return your unassembled kit with all the parts and instructions and proof of purchase to the factory for a
full refund. The return package should be packed securely. Insurance is recommended. Please do not
cause needless delays, read all information carefully.