RAMSET TRAKFAST Скачать руководство пользователя страница 4

Страница: 4 / 6

TRAKFAST REPAIR MANUAL

Rev. 09/07

TOOL OPERATION

Power/Exhaust

Downward movement of the piston assembly, past

exhaust ports (P), allows exhaust gases to exit.

The pressure of the exhaust gases against the flat

washer compresses the wave washers, allowing the

gases to flow through the mid-check area (Q) and

out of the tool through the exhaust ports in the bot-

tom of the housing (R).

At the bottom of stroke, the piston assembly strikes

bumper (S).

Содержание TRAKFAST

Страница 3: ...r activates the ignition circuit This causes a spark N to jump the gap between the spark element and cylinder head igniting the fuel air mixture in the combustion chamber Pis ton assembly O is forced downward driving the fastener into the work surface TOOL OPERATION ...

Страница 4: ...ports P allows exhaust gases to exit The pressure of the exhaust gases against the flat washer compresses the wave washers allowing the gases to flow through the mid check area Q and out of the tool through the exhaust ports in the bot tom of the housing R At the bottom of stroke the piston assembly strikes bumper S ...

Страница 5: ...s wave washers T to reseal the combustion chamber Rapid cooling of gases trapped in the combustion chamber U creates vacuum This vacuum is strong enough to lift and hold the pis ton assembly in its starting position As the piston as sembly moves up the sleeve air is drawn in through ports in the housing nose V ...

Страница 6: ...d from the work surface and the trigger is re leased This opens the seal between the combustion chamber and cylinder head O Ring W and sleeve O Ring X The fan is now able to circulate fresh air into the combustion chamber cooling the sleeve Y and purging any remaining exhaust gases from the tool through ports Z ...