INSTALLING THE
FUEL CELL
• The T3 fuel cell comes ready to use.
There is no need for additional steps
to prepare the fuel cell. The fuel cell
also incorporates a usage indicator,
to indicate a new fuel cell from a used
fuel cell.
• There is a membrane over the top of
the fuel cell adaptor. If the fuel cell
has been used the membrane will
have been pierced. See picture on
the right
1. Locate the port on the left rear of
the tool and slide the fuel cell into
position.
2. Firmly push the fuel cell completely
into the pocket until the adaptor on
top of the fuel cell clicks into the
tool.
3. The fuel cell is now ready.
• To remove the fuel cell from the tool,
push and release the “Fuel Eject”
button located on the front left side
of the tool.
• Excessive removal and installation
of fuel cell will reduce the number
of shots per cell.
#1
#2
#3
INSTALLING THE FUEL CELL
9
INSTALLING THE FUEL CELL
Fuel Cell
Top of the Fuel Cell
