RAMSET InsulFast GT3, Инструкция по эксплуатации

Страница: 6 / 16

Ramset
™
regards training and education of operators a
basic essential for the safe use, operation and
application of Ramset
™
Fastening Tools. Accordingly,
thorough training and instruction is available for all
Ramset
™
Gas Technology Tool operators. Experience has
shown that mishaps and unsatisfactory fixings can be
prevented by proper use.
Disclaimer
“This information is given in good faith but without
affecting any warranty or condition which is
mandatorily implied by legislation applicable hereto.
No liability in contract, tort (including negligence) or
otherwise shall attach to Ramset
™
or its servants or as
agents as a result of the giving of such information or the
correctness thereof.”
WARNING
If any tool parts do not fit correctly, or if wear or
damage is visible, do not use them. Do not, under any
circumstances, attempt to grind or file parts. Worn or
damaged parts must be replaced. Modification of
parts may adversely affect safety features and will
void Warranty.
InsulFast
™
GT3 Tool Kit
Order No.: T3IF
As illustrated below the tool kit consists of an
InsulFast
™
GT3 Pulsa
™
Technology tool, complete with
instruction manual, 2 battery packs, battery charger,
safety glasses and sturdy carrying case. The kit
contents may vary to meet local requirements.
Pic. 1
Accidental Firing
The tool is designed to prevent accidental firing. The tool
prevents accidental firing in a number of ways. The tool
can only be fired when the tool is compressed against the
work surface. The tool also utilises a trigger lock which is
released once the tool is compressed.
Outer Housing
The outer housing is made using a tough, impact
resistant material with low thermal transfer properties.
This minimises the risk of damage if the tool is accidentally
dropped, and also lowers the tool housing temperature
during operation.
Fuel Cell
The Pulsa
™
Technology tool fuel cell is fully contained
within the body of the tool. This greatly reduces the risk
of possible damge to the fuel cell.
Power Supply
Power supply for the tool can be easily isolated by
either placing the battery into the standby position or
removing completely.
Insul Fast
™
GT3
Instruction Manual
6
Ramset
™
Operator Training Safety Features