RAMSET InsulFast GT3, Инструкция по эксплуатации

Страница: 11 / 16

Insul Fast
™
GT3
Instruction Manual
11
Important
Before using your Pulsa
™
Technology tool be sure you
have obtained competent personal instruction and read
all safety rules and understand all the instructions in
this manual for safe operation of the tool. Before
handling the tool check that the tool has the battery
removed or in the standyby position until ready for
use.
The Ramset
™
InsulFast
™
GT3 tool is designed for
fastening insulation to masonry materials, wood and mild
steel.
They should not be used for any other purpose and the
user should read and fully understand the Safety
Precautions on pages 4 and 5.
The Pulsa
™
Technology tool can be used on the following
base materials:
• Concrete/precast concrete.
• Rendered hollow block;
hollow floor block.
• Solid/rendered brick.
• Steel
1. Preparation
(a) Put on approved eye and hearing protection.
(b) Clear people from local area.
(c) Check the local environment is safe for the
use of Pulsa
™
Technology tools, ie. free from
inflammable gases, explosive materials etc.
Refer Safety Precautions page 3 and 4 of
this manual.
(d) Check that the material to be fixed into is
suitable for use with a Pulsa
™
Technology tool.
Refer Safety Precautions page 3 and 4 of this
manual or contact your Ramset
™
representative.
2. Installing the fuel cell
(a) Insert the fuel cell all the way until an audible
“click” can be heard.
SAFETY WARNING
For the safe operation of your Ramset
™
Pulsa
™
Technology tool only use fuel
cells. Specifically designed for use with
the InsulFast
™
GT3 tool.
Pic. 2
3. Inserting the battery
(a) Ensure that the battery is fully inserted in the tool and
not in the standby position.
(b) Check that the green LED light is flashing to indicate
that the battery is charged.
4. Inserting the Insulation Fastener
(a) Place the fastener assembly over the front end of the
tool without compressing the fastener guide.
5. Tool Operation Sequence
(a) Force the fastener assembly through the insulation and
compress the tool completely.
Operating Instructions