DynaDrill™ 518 Cordless Rotary Hammer 18V
Owners Manual
- 012 -
22 | English
1 609 92A 3DF | (14.9.16)
Bosch Power Tools
–
Insert a screwdriver bit into the universal bit holder. Use
only screwdriver bits that match the screw head.
–
To remove the universal bit holder, pull the locking sleeve
5 toward the rear and remove the universal bit holder
out
of the tool holder.
Vibration Damper
The integrated vibration damper reduces occurring vibra-
tions.
The soft grip handle increases the safety against slipping off
and thus provides for a better grip and handling of the power
tool.
Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Store the battery only within a temperature range between
–20 °C and 50 °C. As an example, do not leave the battery in
the car in summer.
Occasionally clean the venting slots of the battery using a soft,
clean and dry brush.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Maintenance and Service
Maintenance and Cleaning
For safe and proper working, always keep the machine
and ventilation slots clean.
A damaged dust protection cap should be changed im-
mediately. We recommend having this carried out by
an after-sales service.
–
Clean the tool holder 3 each time after using.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
ramsetreid Postal:
Australia:
P.O. Box 192
,
Croydon
,
Victoria 3136
1 Ramset Drive
,
Chirnside Park
,
Victoria 3116
Customer Service Center
Inside Australia:
Phone:
1300 780 063
Fax:
1300 780 064
New Zealand:
Inside New Zealand:
Phone:
0800 RAMSET (726738)
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3
9726 6222
www.ramset.com.au
OBJ_BUCH-2545-003.book Page 22 Wednesday, September 14, 2016 8:49 AM