9
9
9
9
9
MP3 PLMP3 PLMP3 PLMP3 PLMP3 PL
AAAAA
YBACK OPERYBACK OPERYBACK OPERYBACK OPERYBACK OPER
AAAAA
TTTTT
IONIONIONIONION
19
19
19
19
19
ACCESSING THE ID3 TAG INFORMATION
To access the ID tag, when available, proceed as follows:
1. Press the ID3 (T/F) button until the ID Tag, if supported, is displayed.
NOTE:
The ID TAG can specify the
Song name
,
Artist
,
Album
,
Year
, and/or
Comments.
2. If no ID TAG is available,
--NO ID3
will appear on the display following
Comments.
SEARCHING BY TRACK NUMBER
To search for a desired track directly, proceed as follows:
1. With the MP3 CD in the play mode, press the MENU (AS/PS) button;
MP3 T
appears on the
display followed by a flashing character position ( ); then press the direct numeric key or
combination thereof, to access the appropriate track.
2. If the desired track number consists of two digits or less, the player will wait a few sec-
onds for the ENTER (
BAND/LOUD/ENTER) button to be pressed; otherwise, the player
will begin searching for the track automatically.
3. When the track is accessed, the track number appears on the display, followed by the
song name.
ALPHANUMERIC SEARCH FOR SONG FILE OR DIRECTORY NAME
To search for a desired directory or song file on the MP3 CD, proceed as follows:
1. With the MP3 CD in play mode, press the MENU button until only a blinking character
position ( ) appears.
2. Then press the desired buttons, or use the PUSH SELECT-VOL control, to enter the
alphanumeric characters of the desired directory or song file name. Up to eight Alphanu-
meric characters can be entered for search.
NOTE:
An alternate search method is provided by rotating the PUSH SELECT-VOL control
when the blinking character position ( ) appears. This is accomplished by
rotating the control clockwise to scroll through the alphabet and digits 0 - 9. After
each character is selected, press the PUSH SELECT - VOL button to confirm the
selection. Then the blinking asterisk will move to the next character position to
await the next selection. Up to eight characters can be entered for search in this
manner.
3. Press the ENTER (
BAND/LOUD/ENTER) button to access the song file or sub-directory.
NOTE:
If the Directory/File is entered incorrectly, or does not exist, NOT FOUND will be
displayed momentarily.
4. Then continue the search within the sub-directory for the song title by using the
/
buttons, but use the
button first.
5. When the title is accessed, press the ENTER button again to begin play of the
selected song.
