128-6691
7 of 16
adjust the treble response as desired. The
treble level will be shown on the display panel
from a minimum of
TRB--10
to a maximum of
TRB 10
(
TRB 00
represents flat response). The
display will automatically return to the nor-
mal indication 5 seconds after the last ad-
justment or when another function is activated.
Adjusting the treble level will automatically
return the equalizer setting to the
FLAT
mode
from its previous setting.
6
6
6
6
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the SEL
button
3
so that the
BAL
indication appears
on the display panel. Within 5 seconds of
choosing the Balance m o d e , p r e s s t h e
VOL +
or
VOL - button
2
to adjust the bal-
ance as desired. The balance position will be
shown on the display panel from
BAL 10L
(full
left) through
BAL 10R
(full right). When the
volume level between the left and right speak-
ers is equal,
BAL L=R
will be shown on the
display panel. The display will automatically
return to the normal indication 5 seconds after
the last adjustment or when another function is
activated.
7
7
7
7
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
3
so that the
FAD
indication appears
on the display panel. Within 5 seconds of
choosing the Fader mode, press the
VOL +
or
VOL - button
2
to adjust the front-rear speaker
balance as desired. The fader position will be
shown on the display panel from
FAD 10R
(full
rear) through
FAD 10F
(full front). When the level
between the front and rear speakers is equal,
FAD F=R
will be shown on the display panel.
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is acti-
vated.
8
8
8
8
8
LOCAL (LOC) OPERATION
This feature is used to select the strength of the
signals at which the radio will stop during
Automatic Seek Tuning. Pressing the button
will select the Local setting (
LOCAL
will appear
on the display panel for 5 seconds and
LOC
will
remain in the center of the display) and only
strong (local) stations will be received. Pressing
and holding the button again will select the
Distant setting (
Dx
will appear on the display
panel for 5 seconds) and the radio will stop at
a wider range of signals, including weaker
(more distant) stations.
9
9
9
9
9
AUDIO MUTE (MUTE
)
This button is used to mute the volume from
the system. By pressing the button, a flash-
ing
MUTE
indication will appear on the dis-
play panel and the volume will be muted.
Pressing the Mute button again, or activating
any other function of the unit will return the vol-
ume level to the setting in use before the Mute
function was activated.
bl
bl
bl
bl
bl
BAND/LOUDNESS CONTOUR SELECTION
(BAND/LOUD)
During radio operation, each momentary
press of this button will change the radio band.
The indication
AM
,
F1
,
F2
, or
F3
will appear on
the display panel according to your selection.
When listening to music at low volume levels,
the loud feature will boost the bass and
treble ranges to compensate for the char-
acteristics of human hearing. Press the
BAND/LOUD button for at least 2 seconds to
activate this feature as indicated by a beep
tone and
LOUD ON
appearing on the display
panel for about 5 seconds. (LOUD re-
mains on the display.) Pressing the but-
ton again for 2 seconds will sound a beep
tone and
LOUD OFF
will appear on the dis-
play for about 5 seconds.
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
7
7
7
7
7
