Rampage 1286691, Руководство пользователя и инструкция по установке

Страница: 13 / 16

128-6691
13 of 16
CD PL CD PL CD PL CD PL CD PL
AAAAA
YER AYER AYER AYER AYER A
ND CD CHND CD CHND CD CHND CD CHND CD CH
AAAAA
NGER ERRNGER ERRNGER ERRNGER ERRNGER ERR
OR CODESOR CODESOR CODESOR CODESOR CODES
13 13
13 13 13
If a problem should develop while operating the CD player, an error code ( ER-1 , ER-2 , ER-3 ,
etc.) may appear on the display panel. This can indicate a number of problems with the unit,
including a mechanical error or an error in the microprocessor control of the player. If an error
code should appear, try ejecting and re-loading the disc into the player. While the disc is out of
the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may
also try activating the RESET button
cu
on the unit, but this will also erase the time and pre-set
memories.
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
CD PL CD PL CD PL CD PL CD PLA A A A AYER ERR YER ERR YER ERR YER ERR YER ERROR CODES OR CODES OR CODES OR CODES OR CODES
13 13
13 13 13