manualshive.com logo in svg

RAMMER 2155E, Руководство оператора

Поделиться
Скачать
RAMMER 2155E Скачать руководство пользователя страница 50

COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY

Page 50 - Lubrication

Hammer tool greasing

2155E STD

 GREASING INTERVAL

1. Tool shank must be well lubricated before installing tool.

2. 10-20 strokes from grease gun to tool bushings and tool at regular intervals.

3. Adapt interval and amount of grease to wear rate of tool and working

conditions. This can be anything between two hours and daily, depending on
material (rock/concrete) to be broken. See “Recommended greases” on page 42.

Insufficient greasing or improper grease may cause:

■

Abnormal wear of tool bushing and tool

■

Tool breakage

 CORRECT GREASING

1. Position the hammer standing upright resting on the tool on firm surface.

2. Stop carrier engine and wait 10 minutes for oil pressure to drop inside hammer.

3. Apply tool grease from grease gun to greasing points marked with the following

sticker.

Note: The hammer must stand upright resting on the tool to ensure that the grease
will penetrate downwards between the tool and the bushing.

Do not fill the space between the piston and the tool with grease. A lower piston seal
failure can result and the hammer will subsequently leak oil.

Содержание 2155E

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды