On one end of the handle, fix the end with the dowel (A) and glue. Insert it into the spindle and glue the
second end on the other end. Leave to dry for at least one hour before use.
Fit the wooden jaw (part 2) on the spindle guide and rotate it onto the already installed spindle body.
4. Installation of the handle in the spindle
Fully tighten the wooden jaw (part 2) with the spindle and ensure that it is horizontal with the table top.
After this, fix the wooden jaw with 6x40 mm screws (F2) to the spindle guide.
F2
F2
A +
glue
