background image

Ramblegard

stay a step ahead

®

 

It stands out from its competitors, 

is effective and it’s economical.

www.ramblegard.com

Open battery case with a Phillips screwdriver and inert 2 x AA alkaline batteries.  Replace battery cover and secure the screw.

Select alarm indication to either “Vib” or “Vib + Tone” to turn the pager on

NOTE: In most instances the Wireless Jill will be sent out as part of a Ramblegard Kit and therefore will be 

preprogrammed for ease of use.  If you do need to program an additional device, go straight to step 3

When the RG41 receives a wireless alarm signal it will vibrate to indicate the alarm (sound optional), and display the alarm type with 
a device ID to help the caregiver determine where to go.  For wireless devices signaling directly the RG41 will display 1-9; signals sent 
from the optional Central monitor will display 01-99.  For Example, PAd 01 could be a wireless bed pad alarm coming from Rm 1.

The RG41 can be used directly with a Wireless bed/chair pad or a Floor mat.  If the ON-PAD reset function is used by quickly pressing 
the pad twice the RG41 will give an audible sound as feedback and briefly flash “Pad rSt”

NOTE: When the pager is receiving signals directly from a wireless device, holding Cancel for ~3s will 

remove the alarm from memory.  If a central monitor is used, press Cancel to silence the alarm.  

Alarm Type

Display

Wireless Pad

Pad  XY

Bathroom Alarm

bAth XY

Pendant Alarm

Pndt XY

Door Monitor

dXYPXYZ (door#, patient#)

1. 

Initial Configuration

2. 

Normal Operation

Содержание Wireless Jill RG41






Отзывы: