TURBORAM |
Edition C - Revision 4
Instruction Manual |
15
TEMPERATURE DISPLAY
Digital display for viewing prover temperature.
HUMIDITY DISPLAY
Digital display for viewing prover humidity.
PROVER HEATING PILOT LIGHT
Turns on the resistances to heat the prover to the desired
temperature.
HUMIDITY PILOT LIGHT
Activates the production of humidity to reach the desired
level of humidity inside the prover.
TEMPERATURE BUTTON
This button has two functions. Pressing once allows
for the editing of the temperature inside the prover
between 0……60°C. A prolonged pressing will turn the
heating ON or OFF. If the led button is lit, the heating is
turned on.
HUMIDITY BUTTON
This button features two distinct functions. When
pressed once it enables the user to edit the humidity
of the prover between 30 ... 90%. When this button is
pressed for 2’’ it turns on or off the humidity in the prover.
If the LED is lit the humidity is on.
INCREASE VALUE BUTTON
This button when pressed after the buttons or ,
will increase the value shown on the display.
DECREASE VALUE BUTTON
This button when pressed after the buttons or ,
will decrease the value shown on the display.
LIGHT BUTTON
This button enables the user to turn the light on or off.
The light will remain on for the duration of time previously
set by the manufacturer and will turn off automatically.
TECLA ON/OFF
If you press the button for more than 2 seconds, the
control panel will be turned ON or OFF. If the led button
is lit, it means the control panel has been turned off.
EST.D14
HR%
2 2
5 7
HR%
+
–
HR%
HR%
1
2
6
8
10
4
3
5
7
9
1
6
7
8
9
10
2
3
4
5
8 | Description of the front panel of the prover control panel (option)
