Accel/Decel
To Increase Speed
When the Electronic Speed Control is set, you can increase speed by tapping the
Speed Control lever up (+).
The drivers preferred units can be selected through the radio settings if equipped.
Refer to ”Uconnect
®
Settings” in “Understanding Your Instrument Panel” on the
DVD for more information. The speed increment shown is dependant on the chosen
speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Tapping the Speed Control lever up (+) once will result in a 1 mph increase in set
speed. Each subsequent tap of the lever results in an increase of 1 mph.
• If the lever is continually held up, the set speed will continue to increase until the
lever is released, then the new set speed will be established.
Metric Speed (km/h)
• Tapping the Speed Control lever up (+) once will result in a 1 km/h increase in set
speed. Each subsequent tap of the lever results in an increase of 1 km/h.
• If the lever is continually held up, the set speed will continue to increase until the
lever is released, then the new set speed will be established.
To Decrease Speed
When the Electronic Speed Control is set, you can decrease speed by tapping the
Speed Control lever down (-).
The drivers preferred units can be selected through the radio settings if equipped.
Refer to ”Uconnect
®
Settings” in “Understanding Your Instrument Panel” on the
DVD for more information. The speed increment shown is dependant on the chosen
speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Tapping the Speed Control lever down (-) once will result in a 1 mph decrease in
set speed. Each subsequent tap of the lever results in a decrease of 1 mph.
• If the lever is continually held down, the set speed will continue to decrease until
the lever is released, then the new set speed will be established.
Metric Speed (km/h)
• Tapping the Speed Control lever down (-) once will result in a 1 km/h decrease in
set speed. Each subsequent tap of the lever results in a decrease of 1 km/h.
• If the lever is continually held down, the set speed will continue to decrease until
the lever is released, then the new set speed will be established.
Resume
• To resume a previously set speed, push the RES button and release.
O P E R A T I N G Y O U R V E H I C L E
28
