RAM PJO700, Руководство пользователя

Страница: 20 / 28

REAR PANEL
A - 5 pins male power supply connector.
B - 1/4” output for stereo headphone A.
C - 1/4” output for stereo headphone B.
D - USB socket
E - Switch behind the panel , to separate the USB ground from the PJO700. Separation when pressed.
F - Key to send a 1KHz tone to microphone B/line A input. Use :
a) check of record level :
- switch to line A without signal on A.
- enable switch
9
- increase level on pot 11
Tone is sent to the sound card output, and monitored on pot 23 .
b) to calibrate feedback, see feedback setting chapter.
G - Female Sub-D 25 including:
- direct balanced analog output .
- analog balanced program insertion return.
- A and B analog and balanced inputs.
- external ON AIR indicator line output (mos opto coupler)
- balanced analog monitor output.
1
2
3
4
5
+12V
0V
1
Out -
Out -
Out -
Out -
Out +
Out +
Out +
Out +
In+
In +
In -
In -
Monitor R
Out R / Insertion R send
External On Air opto
coupleur output
Insertion L Return
Insertion R Return
Monitor L
Out L / Insertion L send
In -
In -
In -
In -
In +
In +
In +
In +
Line A Left
Line B Left
Line A Right
Line B Right
 Wiring:
Sub-D 25pts male plug
DC 12V
Max 500mA
PHONE LINE
USB
Mic C
Sens
MiC B
Sens
Mic A
Earth
Lift
Generator
Connector A
Connector B
A B
Made in France
Line B
Mic C
PUSH
A B C D F G E
20 Rami PJO700